Home / Insights / Peat on development sites
Muirburn licensing: when you need a peat depth survey and how to plan one
Since 15 September 2026, muirburn on any land in Scotland needs a NatureScot licence. This guide sets out, from NatureScot's own pages, when a peat depth survey is needed, the two survey methods, how results must be recorded, and how to plan the work.

- Since 15 September 2026, a NatureScot licence is needed to carry out muirburn on any land in Scotland. The standard season runs from 15 September to 31 March.
- The Wildlife Management and Muirburn (Scotland) Act 2024 defines peatland as land with peat layers more than 40 cm.
- For a non-peatland purpose, ground that NatureScot's interactive map classes as uncertain must be surveyed on a 100 m grid, with a walkover of non-peatland areas. For a peatland purpose, no survey is needed.
- Results must be typed into NatureScot's own template. Other formats are not accepted.
- You can apply for a smaller area first and add survey results later by licence amendment.
This is a factual guide to the survey side of muirburn licensing. It takes no position on muirburn itself. Every statement below is drawn from NatureScot's licensing page and its survey guidance, linked in the sources, and was checked on 18 November 2026. Licence decisions rest with NatureScot, and the guidance may change, so check the live pages before you plan a survey.
When a licence is needed
Section 12 of the Wildlife Management and Muirburn (Scotland) Act 2024, which makes it an offence to make muirburn without a licence, came into force on 15 September 2026. From that date a NatureScot licence is needed to carry out muirburn on any land in Scotland. The standard muirburn season runs from 15 September to 31 March. NatureScot notes that in exceptional cases it may license out-of-season muirburn for a specific purpose that could not be achieved by burning in season.
Licences are granted for set purposes, and the purposes differ between non-peatland and peatland. The non-peatland purposes include managing the habitats of moorland game or wildlife, and research. The peatland purposes include restoring the natural environment, and training. The full lists are on NatureScot's licensing page.
What counts as peatland
The Wildlife Management and Muirburn (Scotland) Act 2024 defines peatland as land with peat layers more than 40 cm. NatureScot's survey guidance describes peatland as areas with over 60% organic matter and a thickness of more than 40 cm.
NatureScot's interactive map classes land as non-peatland, peatland or uncertain, where peat depth is not known. NatureScot says the map uses a combination of existing survey and modelled data from the James Hutton Institute. Its survey guidance says areas classed as uncertain are likely to contain peat, but the depths are unknown.
When a peat depth survey is needed
- Non-peatland purpose. You must survey any uncertain areas in a 100 m grid, and carry out a walkover survey of any non-peatland areas to confirm the absence of peat.
- Peatland purpose. NatureScot states that you do not need to carry out a survey.
- Disputed classification. You only need to survey areas mapped as peatland if you disagree with the classification on the interactive map and want a non-peatland licence for them.
The two survey methods
Method A, walkover. NatureScot's guidance uses this method to check areas classed as non-peatland. You walk the land, check suspect wet or soft areas with a probe, and record any depths over 40 cm. Where peat over 40 cm is found, the guidance asks for further measurements at intervals of 100 m or less around the point to define its extent, so the area can be excluded from a non-peatland licence.
Method B, grid. Sample points are taken in a grid pattern at 100 m intervals or less. The guidance uses this method for uncertain areas, and for peatland areas you believe the map has misclassified and want to license for a non-peatland purpose.
Measuring and recording
- Equipment. The guidance says peat depth is best measured with a specialist tool such as a narrow T probe or a core sampler. A 1 m rod marked at 5 cm intervals is acceptable, though less accurate.
- Readings. Record the exact depth or the nearest 5 cm. A reading between 40 and 45 cm is rounded up to 45 cm. Readings must be actual depths, not "greater than" or "less than" 40 cm.
- Location. Use a GPS, phone app or map to locate points. Give a 10-digit grid reference with its two-letter prefix for each probing point, and a distance if you had to move from the sampling point.
- Template. The interactive map provides coordinates (.gpx) and a survey template (.xls) for the area you specify. Results must be typed into that template. NatureScot cannot accept other formats.
Planning the survey
NatureScot's licensing page says: "We understand it may take time to carry out peat depth surveys." The same page says licence holders can add survey results over time by requesting a licence amendment, so you can apply for a smaller area in the first year and submit more data later.
In practice, planning usually means three decisions: which parts of the estate to put into the first application, when the field days can run within the season, and who will carry out and record the survey. The licensing page also covers training. All those who intend to muirburn must complete the Muirburn Practitioner Foundation Course, and evidence of training for one person is needed in the application. It is a condition of the licence to have regard to the Muirburn Code.
Where Vireo can help
Vireo's Probe Plan supports the survey. It does not replace it, and it plays no part in NatureScot's licence decision.
- Shows which parts of the estate the map reads as shallower and which as deeper, before survey (indicative).
- Helps plan which areas to survey and apply for first.
- Grid points laid out to the spacing the guidance sets, with field files for your surveyor.
- Results delivered in NatureScot's recording template, with a map. Measured points close to 40 cm are highlighted in the results pack so the record can be checked.
On uncertain ground the NatureScot survey is still required. Vireo's map does not change what the guidance asks for. Vireo is not a regulator. Licence decisions rest with NatureScot. See the Probe Plan.
Questions and answers
Do I need a peat depth survey for a peatland purpose?
NatureScot's licensing page states that you do not need to carry out a survey for a peatland purpose.
What depth of peat makes land peatland?
The Wildlife Management and Muirburn (Scotland) Act 2024 defines peatland as land with peat layers more than 40 cm.
What grid spacing does the survey use?
For Method B, NatureScot's guidance sets sample points in a grid at 100 m intervals or less.
Can I survey part of the estate first?
Yes. NatureScot says licence holders can add survey results over time by requesting a licence amendment, so you can apply for a smaller area in the first year and submit more data later.
Can I send results in my own spreadsheet?
No. Results must be typed into the template NatureScot provides. NatureScot cannot accept other formats.
Does a desk map replace the NatureScot survey?
No. On uncertain ground the NatureScot survey is still required. Vireo's map does not change what the guidance asks for, and licence decisions rest with NatureScot.
Sources
- NatureScot: Muirburn licensing (read 18 November 2026)
- NatureScot: Guidance, peat depth survey for muirburn licensing (read 18 November 2026)
- NatureScot: Check your land for a muirburn application, interactive map (read 18 November 2026)
- legislation.gov.uk: Wildlife Management and Muirburn (Scotland) Act 2024, section 12, in force 15 September 2026 (SSI 2026/200) (read 18 November 2026)
Contains public sector information licensed under the Open Government Licence v3.0. LiDAR: Scottish Government, Scottish Remote Sensing Portal.
Grid points and field files for your surveyor, and results in NatureScot's template.
See the Probe PlanTap real peat, river, habitat and ground motion data, read by the Vireo Neural Map.
Explore the live map


